• Zagi 33 Wing

Zagi 33

$65.00

Covering Tape * 

Covering Tape, second roll

Canopy/Motor mount material * 

Your choice of .040″ (standard) or .060 Styrene. Also Kydex

Zagi 33 Manual

Category: Tags: , , , ,

Size, performance, speed, durability and portability are some of the attractions of the Zagi 33. The Zagi 33 does everything quickly. With a thrust to weight ratio of 2:1, vertical performance is great. Rolls are agile and clean, and the roll rate is quick. Skill level is intermediate to advanced.

The Zagi 33 is your perfect FPV racer. Its ability to speed through turns and accelerate quickly will keep you ahead of the competition till the win!

Specifications:

Flight Mode Electric Power
Wing Span 33 inches
Airfoil Zagi 101.5 (high lift)
Flying Weight 18.5 oz
Wing Area 2.5 ft2
Wing Loading 7.0 oz/ft2
Top Speed 100mph+

Kit contents:

2 CNC wire cut  EPP wing cores and beds
2 Tapered shaped  balsa elevons
1 Polystyrene motor tray and canopy
1 Flat carbon fiber spars
2 Polystyrene winglets
2 Control hornes, 2 control rods and 2 clevises
1 60 yd. roll Fiberglass fiber filament tape
1 roll Colored poly tape covering material

Required to build:

  • * 1 Radio-control transmitter, capable of elevon mixing
  • * 1 Radio-control receiver, minimum 3 channels
  • * 1 Brushless motor and electronic speed control (ESC)
  • * 1 Propeller and prop adapter
  • * 2 Servos, “micro” size
  • * 1 LiPo battery
  • * 1 Battery charger
  • 3M Super 77 spray adhesive
  • Assortment of tools (see assembly manual)

 

The 33 Manual is available for download here. If you want a paper copy they can be included for $2.

* Available from Zagi

Related Products

  • Motor Mount for Zagi HP and HP60

    $10.00

    Motor mount (without canopy), as included with Zagi HP and HP60 models.

    The HP (hard point) flying wing motor mount system integrates a laser cut 1/8″ plywood motor mount laminated inside in the styrene motor tray. This mount system is stable and strong. The HP Tray will accommodate an inrunner motor or a front mounted outrunner motor, up to 30mm diameter. The HP mount has three different pre-measured hole patterns for most motors including the standard Zagi 3100 Kv inrunner.

    No available in .060″ Styrene and black .060″ Kydex.

    Add to cartShow details

  • Elevons

    $6.00
    Select optionsShow details

  • Zagi THL High-Lift Flying Wing Glider

    $65.00

    The 48 inch Zagi THL flying wing is made of resilient expanded polypropylene (EPP) foam and reinforced with carbon fiber spars. The Zagi THL has a high lift, low drag profile. Flying weight is only 14 ounces providing a loading of only 4.1 oz/ft2 including receiver and 1600 mAh battery pack.

    The Zagi THL flies well in light slope lift or small hills. The testing for this model was done on a 30 foot berm at the beach in Southern California. The Zagi THL flying wing will fly at about 5 MPH and penetrates in winds to 15 MPH. The design objectives were to make a rugged, low cost, light weight wing for light slope lift, thermal and hand launch applications.

    Specifications:

    Flight Mode Slope Glider
    Wing Span 48 inches
    Airfoil Zagi 999.1 (high lift glider)
    Flying Weight 14.0 oz
    Wing Area 3.4 ft2
    Wing Loading 4.1 oz/ft2
    Wind Speed 5 to 15 MPH

    Kit contents:

    • 2 Precision CNC cut EPP foam wings
    • 2 Carbon fiber spars
    • 2 Balsa elevons
    • 2 Coroplast winglets
    • 2 Strips hinge tape
    • 2 Control horns and control rods
    • 1 Roll fiber tape
    • 1 Roll colored covering tape
    • 1 Illustrated assembly manual

    Required to build:

    • * 1 Radio-control transmitter, capable of elevon mixing
    • * 1 Radio-control receiver, minimum 2 channels
    • * 2 Servos, “micro” size
    • * 1 NiMH battery
    • * 1 Battery charger
    • 1 Can 3M Super 77 spray adhesive
    • Assortment of tools (see assembly manual)

    * Available from Zagi

    Select optionsShow details
  • carbon fiber elevonscarbon fiber elevons

    Carbon Elevons for Zagi HP

    $18.00 – $27.00

    Here they are! We’ve finally found someone to make Carbon Fiber elevons for us! You’ll get a pair in your order. These are balsa core and precut to fit the HP. Not cheap vinyl carbon sticker material or dyed fiberglass, these are light, rigid and ready to fly. You’ll need more hinge tape to install.

    Select optionsShow details