The Optic 5, 5-channel 2.4GHz transmitter is perfect for beginner pilots. The Minima 6E full-range receiver is included.
Hitec Optic 5 Transmitter
This is the ideal battery pack for for the Zagi THL.
- Nickel Metal Hydride
- 1600 mAh
- 5 cell, 6V
- “S” servo type plug
This is an extra large battery pack for the Zagi HP, HP60 and Zijji. Fly harder, fly longer!
- 3000 mAh
- 3 cell, 11.1V
- 30C discharge
- 5C charge
- “Deans” T type plug included
This lightweight, three-axis gyro provides high performance stabilization, increased precision and smooth navigation in the most challenging flight conditions. The HG3XA gyro’s accurate angular motion detection will instantaneously improve your 3D performance, making hovers, torque rolls, harriers and knife edge passes easier to master. Three trimming potentiometers allow you to separately adjust the gyro gain of your aircraft’s aileron, elevator and rudder. Toggle between three different flight modes while your model is airborne: “off”, “standard” and “heading hold” mode. Complete package includes the HG3XA gyro, connecting cables and adhesive mounting pads.
The 3100 Kv motor is a custom designed and crafted motor made to optimize the efficiency of light-weight batteries. That means longer flights and less power loss from overheating. This motor turns the prop over 22,000 rpm at only 30 amps in static testing. Unloaded in flight the RPM increases 20% and the current drops 20%. We have tested higher Kv motors like 3600 and 4000 Kv, and found them to be power hungry (45 to 60 amps) with small RPM gains.
The recommended set up is direct drive with a 5 X 5 prop and a 35 to 40 amp ESC using a maximum of 3 LiPo cells.
The operating RPM range of this motor is 22,000 to 42,000. The prop should be balanced to achieve maximum efficiency and avoid bearing wear.
The Zagi Inrunner Motor System comes with:
- 3100 Kv, 28 X 35mm, Brushless Inrunner Motor
- 3.5mm Male Connectors