• thl

    Zagi THL High-Lift Flying Wing Glider

    $65.00

    The 48 inch Zagi THL flying wing is made of resilient expanded polypropylene (EPP) foam and reinforced with carbon fiber spars. The Zagi THL has a high lift, low drag profile. Flying weight is only 14 ounces providing a loading of only 4.1 oz/ft2 including receiver and 1600 mAh battery pack.

    The Zagi THL flies well in light slope lift or small hills. The testing for this model was done on a 30 foot berm at the beach in Southern California. The Zagi THL flying wing will fly at about 5 MPH and penetrates in winds to 15 MPH. The design objectives were to make a rugged, low cost, light weight wing for light slope lift, thermal and hand launch applications.

    Specifications:

    Flight Mode Slope Glider
    Wing Span 48 inches
    Airfoil Zagi 999.1 (high lift glider)
    Flying Weight 14.0 oz
    Wing Area 3.4 ft2
    Wing Loading 4.1 oz/ft2
    Wind Speed 5 to 15 MPH

    Kit contents:

    • 2 Precision CNC cut EPP foam wings
    • 2 Carbon fiber spars
    • 2 Balsa elevons
    • 2 Coroplast winglets
    • 2 Strips hinge tape
    • 2 Control horns and control rods
    • 1 Roll fiber tape
    • 1 Roll colored covering tape
    • 1 Illustrated assembly manual

    Required to build:

    • * 1 Radio-control transmitter, capable of elevon mixing
    • * 1 Radio-control receiver, minimum 2 channels
    • * 2 Servos, “micro” size
    • * 1 NiMH battery
    • * 1 Battery charger
    • 1 Can 3M Super 77 spray adhesive
    • Assortment of tools (see assembly manual)

    * Available from Zagi

  • 5c-0

    Zagi 5C Flying Wing Combat Glider

    $70.00

    The Zagi 5C flying wing is CNC wire cut from resilient expanded polypropylene (EPP) foam. In the hands of expert pilots blazing across the slopes in aerial combat or beginners doing combat with terra firma, the Zagi 5C will stand up to the mission. That’s what the Zagi 5C flying wing is made for. It will get you through your learning curve as a beginner and at the top end, survive the toughest California style full contact combat.

    Specifications:

    Flight Mode Combat Glider
    Wing Span 48 inches
    Airfoil Zagi 101.3 (fast glider)
    Flying Weight 17.5 oz
    Wing Area 2.0 ft2
    Wing Loading 8.5 oz/ft2
    Wind Speed 6 to 45 MPH

    Kit contents:

    • 2 Precision CNC cut EPP foam wings
    • 5 Carbon fiber spars
    • 2 Balsa elevons
    • 2 Plastic winglets
    • 1 Plastic battery bay floor
    • 2 Control horns and control rods
    • 1 Roll fiber tape
    • 1 Roll colored covering tape
    • 1 Illustrated assembly manual

    Required to build:

    • * 1 Radio-control transmitter, capable of elevon mixing
    • * 1 Radio-control receiver, minimum 2 channels
    • * 2 Servos, “standard” size
    • * 1 NiMH battery
    • * 1 Battery charger
    • 1 Can 3M Super 77 spray adhesive
    • Assortment of tools (see assembly manual)

    * Available from Zagi

    5c-55c-6

    At almost any slope anywhere, a few Zagi flyers show up and the flying wing battle begins.

    5c-75c-8

    Snake Hill in Southern California.

  • hp

    Zagi HP Electric Flying Wing

    $90.00

    The Zagi HP is a versatile flying wing. The motor tray employs a built in hard-point (HP) mounting system. The new system integrates a laser cut 1/8″ plywood motor mount laminated inside in the styrene motor tray. The universal HP mount has three different pre-drilled holes in patterns for most brushless motors. This mount system provides the ridged platform brushless power requires. The HP mount distributes the thrust and torque load over a wide area of the foam wing, ensuring a solid connection between power and wing.

    Specifications:

    Flight Mode Aerobatic Electric Power
    Wing Span 48 inches
    Airfoil Zagi 101.4 (high speed)
    Flying Weight 25.5 oz
    Wing Area 2.8 ft2
    Wing Loading 9.1 oz/ft2
    Top Speed 85 MPH

    Kit contents:

    • 1 HP brushless motor mount and canopy
    • 2 Precision CNC cut EPP foam wings
    • 5 Carbon fiber spars
    • 1 Plywood brace
    • 2 Balsa elevons
    • 2 Plastic winglets
    • 2 Plastic servo fairings
    • 2 Strips hinge tape
    • 2 Control horns and control rods
    • 1 Roll fiber tape
    • 1 Roll colored covering tape
    • 1 Illustrated assembly manual

    Required to build:

    • * 1 Radio-control transmitter, capable of elevon mixing
    • * 1 Radio-control receiver, minimum 3 channels
    • * 1 Brushless motor and electronic speed control (ESC)
    • * 1 Propeller and prop adapter
    • * 2 Servos, “micro” size
    • * 1 LiPo battery
    • * 1 Battery charger
    • 3M Super 77 spray adhesive
    • Assortment of tools (see assembly manual)

    * Available from Zagi

  • hp60

    Zagi HP60 Large Electric Flying Wing

    $100.00

    The Zagi HP60 is graceful 60 inch flying wing. This flying wing has low wing loading and high-lift airfoil, making it a good platform for UAV and FPV applications. Lower wing loading also provides improved thermal performance, lower landing speed and improved stability. Expand your fly zone with the five foot flying wing.

    The evolution of the Zagi HP has evolved naturally to a commercial and military UAV training tool. NASA Ames, the US Navy and universities have used the Zagi HP60 to introduce students to UAV and FPV flight.

    Specifications:

    Flight Mode High Lift Electric Power
    Wing Span 60 inches
    Airfoil Zagi 101.5 (high lift)
    Flying Weight 31.5 oz
    Wing Area 4.5 ft2
    Wing Loading 7.0 oz/ft2
    Top Speed 55 MPH

    Kit contents:

    • 1 HP brushless motor mount and canopy
    • 2 Precision CNC cut EPP foam wings
    • 5 Carbon fiber spars
    • 1 Plywood brace
    • 2 Balsa elevons
    • 2 Plastic winglets
    • 2 Plastic servo fairings
    • 2 Strips hinge tape
    • 2 Control horns and control rods
    • 1 Roll fiber tape
    • 1 Roll colored covering tape
    • 1 Illustrated assembly manual

    Required to build:

    • * 1 Radio-control transmitter, capable of elevon mixing
    • * 1 Radio-control receiver, minimum 3 channels
    • * 1 Brushless motor and electronic speed control (ESC)
    • * 1 Propeller and prop adapter
    • * 2 Servos, “micro” size
    • * 1 LiPo battery
    • * 1 Battery charger
    • 3M Super 77 spray adhesive
    • Assortment of tools (see assembly manual)

    * Available from Zagi